What Should I Pay Attention to in the Use of a CNC Lathe Machine?

The proper use of a CNC lathe machine not only can effectively improve efficiency but also can extend the service life of the machine.

Improve the overall quality of the operator

The use of a CNC lathe machine is more difficult than ordinary machine tools because CNC lathe machine is a typical mechatronics product, which involves a wide range of knowledge, that is, the operator should have a broader professional knowledge of the machine, electricity, liquid, gas, etc.; in addition, because the electrical control system of the CNC system upgrades, updates are relatively fast, if you do not regularly participate in the professional theoretical training and learning, it is not proficient in the application of the new CNC system, so the quality requirements for operators is very high. Therefore, the CNC operator must be trained to make the machine principle, performance, lubrication parts and operation, more systematic learning, to lay the foundation for better use of the machine. At the same time in the use and management of CNC lathe machines, the development of a series of maintenance and use of measures.

The environment of the equipment

To improve the service life of a CNC lathe machine, it is generally required to avoid direct sunlight and other heat radiation, to avoid moisture, dust, or corrosive gases in the place. Precision CNC lathe machines should be away from equipment with high vibration, such as punching machines, forging equipment, etc. Good power supply to ensure that in order to avoid large power fluctuations (greater than ± 10%) and possible instantaneous interference signals and other effects, CNC lathe machine generally uses a dedicated line power supply (such as from the low-voltage distribution room to divide a separate way for CNC lathe machine use) or additional voltage regulator, etc., can reduce the impact of the quality of power supply and electrical interference.

Machine failure

To calmly treat machine failure, not blindly deal with it. The CNC lathe machine will inevitably have some failure in use, the operator should be calm at this time, not blindly deal with, so as not to produce more serious consequences, pay attention to retain the scene, to wait for the maintenance personnel to come after the truthful description of the situation before and after the failure, and participate in the common analysis of the problem, as soon as possible to remove the fault. If the fault belongs to the operating reasons, the operator should learn from experience in time to avoid making the same mistakes next time.

CNC lathe machine should not be idle

After the purchase of CNC lathe machine to make full use of the newly purchased CNC lathe machine should be put into use as soon as possible, the equipment in the early use of the failure rate is often relatively large, the user should make full use of the machine within the warranty period, so that its weak links are exposed as early as possible, within the warranty period to solve. Processing, minimize the CNC lathe machine spindle opening and closing to reduce the wear and tear on the clutch, gears, and other devices. No processing tasks, CNC lathe machine should also be regularly energized, preferably 1 to 2 times a week, each empty run for about 1 hour, in order to use the heat of the machine itself to reduce the humidity in the machine, so that the electronic components do not get wet, but also in time to find out if there is a battery power shortage alarm to prevent the loss of system settings parameters.

Develop operating procedures

In the use and management of CNC lathe machines, a series of practical and effective operating procedures should be developed. For example, lubrication, maintenance, reasonable use, and standardized shift change system are the main contents of CNC lathe machine use and management. The development and compliance with operating procedures are important measures to ensure the safe operation of CNC lathe machines. The practice has proved that many failures can be reduced by observing the operating procedures.

We are a CNC lathe machine supplier, please feel free to contact us if you need them.